INTECHFLOOR

Use cases

Detecting water leaks under supermarket refrigerated display cases

To detect a leak under a supermarket refrigerated display case, you place leak sensors on the floor along the cases: HydroSensor sends a real-time alert, 24/7, and precisely indicates the affected zone (120 cm section), before the water spreads into the aisles.

Updated 1 October 2026

Why is a leak under a refrigerated case so costly?

A leak under a refrigerated display case often goes unseen: water collects under the unit before it shows up in the aisle. By the time someone notices, the damage is done:

  • Slip and fall risk for customers and staff, with the human and legal consequences that follow.
  • Lost stock if the case has to be emptied or the fault gets worse.
  • Lost trading when an aisle or section has to be closed.
  • Cleaning and repairs to the floor and equipment.
  • Damage to the store’s image with shoppers.

Where does the water come from?

Facility managers know the usual suspects:

  1. Condensate drainage: the lines that carry water away from refrigerated cases clog and overflow.
  2. Roof leaks that reach the sales floor.
  3. Air conditioning, whose drains can also leak.

Whatever the cause, the earlier the leak is detected, the simpler the fix.

How does in-floor leak detection work?

HydroSensor builds leak sensors in under Gerflor tiles, along the refrigerated cases, where shoppers never see them.

FunctionHydroSensor
DetectionLeak sensors built into the floor
AlertsReal time, 24/7
LocationBy 120 cm section
ConnectivityPrivate LoRa network and 4G
SetupPlug and play
MonitoringAlert history

The central unit runs autonomously on its own private network, so the system does not depend on the store’s IT and poses no cybersecurity risk to it. Alerts are sent by e-mail and can be viewed on the dedicated web platform, with sections mapped to the store layout.

How is it installed in a store that stays open?

  1. Survey the run of refrigerated cases and the zones to monitor.
  2. Fit the sensors along the cases, under Gerflor tiles, by trained partner installers, when a new store is fitted out or the floor is renovated, outside opening hours (evenings and nights), without closing the store.
  3. Commission the central unit and configure zones and alert recipients.
  4. Monitor: every alert shows the affected zone, and the history helps you spot cases that leak repeatedly and plan maintenance.

At end of life, the sensors are designed to be recycled.

What happens when an alert comes in?

The point of detection is to buy time: the alert precisely indicates the zone, staff make the aisle safe and call the refrigeration engineer before the water spreads. The history then shows whether the same unit keeps causing problems.

Which other sites face the same risk?

Beyond supermarkets and their refrigerated cases, Intechfloor leak detection, with Leak Detection, also serves commercial buildings, industrial and pharmaceutical sites and data centres, where water on the floor threatens sensitive stock or equipment.

How do you equip your stores?

HydroSensor is quoted on request, based on the floor area and the length of refrigerated cases. See HydroSensor detection for how the system works, and request a quote from that page, with the store plan if you have it. Requests are handled with Gerflor. Other scenarios are covered in our people counting and leak detection use cases.

Frequently asked questions

Why do refrigerated display cases leak?

The most common cause is condensate drainage: a clogged drain line overflows under the case. Roof leaks and air conditioning can also put water on the shop floor.

How do I get alerted to a leak at night or at the weekend?

HydroSensor monitors the floor around the clock and sends a real-time alert by e-mail, precisely indicating the affected zone. Staff or your refrigeration engineer can act without waiting for opening time.

Does the store have to close to install leak detection?

No. With the Gerflor GTI Max floor, installation takes place when the floor is renovated, over the existing tiles, outside opening hours (evenings and nights), without closing the store, by trained partner installers. The schedule depends on your sales floor.

How precisely does HydroSensor locate a leak?

Leaks are located precisely, by 120 cm section. Along a run of refrigerated cases, that is enough to identify the faulty unit quickly.

Try Mat 2.0 at your next event.

A guided pilot: installation, live data and a full report. Then you choose: buy or subscribe.

Request a pilot Shop