Use cases
People counting for festivals: control entrance flows and capacity live
To count people at a festival, you lay Mat 2.0 mats at each entrance: they count movement in both directions and show in real time how many people are on site or in a given area. At Paléo Festival 2024, this setup counted 262,215 festival-goers over 6 days.
Updated 1 October 2026
Why count people at a festival?
A ticket sold does not tell you how many people are on site at 10 pm. Between pass-outs, re-entries, guests and staff, only counting entries and exits gives you the real number. It serves three purposes:
- Staying within capacity for the whole site or a specific area (pit, big top, VIP space).
- Steering your teams: opening an extra gate or reinforcing security and bars where the crowd is heading.
- Documenting attendance for sponsors, local authorities and your post-event report.
How do you set up counting at festival gates?
- Identify the passages to equip: main entrances, exits and access points between areas. Each mat is 50 cm wide and one gateway connects 1 to 10 mats, covering a passage from 50 cm to 5 m.
- Lay the mats and cover them with the outdoor cover mat, overlapping by at least 20 cm. Outdoors, add the outdoor platform, suitable for any ground (grass, gravel, paving, slabs, asphalt…).
- Plug in the gateway on mains power (220-240 V or 110-127 V), sheltered from the weather, no more than 8 m from the mats. It connects over 4G, independently of your network. Setup takes around 10 minutes, with no calibration.
- Follow capacity in the Technis Counting app (iOS, Android, web) and set threshold alerts for each area.
If 4G saturates at peak time, the gateway buffers the data and sends it as soon as the network is back.
What do you actually measure? The Paléo Festival example
At Paléo Festival in Nyon, Switzerland, counting started in 2023 with the pit during Indochine’s concert, capped at 800 people. In 2024, the whole site was equipped:
| Metric | Paléo Festival 2024 |
|---|---|
| Festival-goers over 6 days | 262,215 |
| Average time on site | 5 h 23 min |
The full setup is described in the case study Paléo Festival: counting 262,215 festival-goers.
Counting mats or ticket scanning: which should you choose?
Ticket scanning controls access, but it usually only sees entries. The mat counts both directions and gives you real-time occupancy. The two work well together.
| Criterion | Ticket scanning | Mat 2.0 |
|---|---|---|
| Entries | Yes | Yes |
| Exits and occupancy | Rarely | Yes, in real time |
| Internal areas without tickets | No | Yes |
| Personal data | Linked to the ticket | None |
For more detail, read counting mat vs ticket scanning and our guide to event capacity calculation.
Buy, rent or trial before your next edition?
A recurring festival often recoups the purchase: a passage pack costs from €580 excl. VAT (50 cm) to €2,830 (5 m), plus the Counting Service at €160 excl. VAT per year per gateway and the 4G subscription at €80 per year (mandatory, included with every gateway). For a one-off edition, rental is quoted on request. To validate the setup on your own gates, request a pilot. Full specifications are on the Mat 2.0 people counting mat page.
Frequently asked questions
How do you know how many festival-goers are on site at a given moment?
You count entries and exits at every gate. Mat 2.0 mats do this continuously and the Technis Counting app shows real-time occupancy for the whole site or for each area.
Can counting mats cope with rain and mud at an outdoor festival?
The mats are rated IP54 and are used outdoors under an outdoor cover mat, with the outdoor platform suitable for any ground. The gateway must stay sheltered from the weather and plugged into mains power.
Can you monitor capacity in the pit in front of a stage?
Yes. In 2023, Paléo used Mat 2.0 to manage the pit during Indochine's concert, capped at 800 people. A threshold alert warns the team before the limit is reached.
Can I rent counting mats for a single festival?
Event rental is available on request and includes the hardware, the app and support. For a first edition, a pilot is another way to validate the setup on your own gates.
Related reading
Crowd crush: how do you prevent it at an event?
Crowd crush explained: density per m², warning signs and prevention measures for event organisers, and the role of real-time people counting by zone.
→How do you count visitors at a Christmas market?
Christmas market visitor counting: entries at each access point, footfall by the hour, a report for the council and sponsors. Mat 2.0 mats, no cameras.
→Paléo Festival: counting festival-goers across the entire site
At Paléo Festival 2024 in Nyon, floor-based counting covered the entire site: 262,215 festival-goers over 6 days, 5 h 23 min average stay.
→How to calculate the maximum occupancy of an event
Usable area, density per m², emergency exits: how to calculate the maximum capacity of an event, then monitor it live at every entrance and exit.
→Counting mat or ticket scanning: which measures occupancy?
Ticket scanning counts entries, not real occupancy. A comparison of ticket scan attendance and a counting mat for controlling real event occupancy.
→Counting mat or manual clicker: which should you choose?
Manual people counter or automatic counting mat? Reliability at peak times, staffing and live occupancy: how to choose the right method for your event.
→Try Mat 2.0 at your next event.
A guided pilot: installation, live data and a full report. Then you choose: buy or subscribe.