People counter comparison
The right people counter depends on three questions: do you need to count exits as well as entries, do people walk through side by side, and is the venue permanent or temporary. For wide passages and temporary events, a counting mat such as Mat 2.0 counts both directions without a camera; for zone analytics in a shop, a 3D camera is still the better fit.
Updated 1 October 2026
What should you ask before choosing a people counter?
Before comparing products, answer four questions about your venue:
- What do you want to measure? Total entries over a day, or the number of people inside right now (occupancy)? For occupancy, exits must be counted as accurately as entries.
- How does the crowd move? A 90 cm door where people walk through in single file is nothing like a 5 m festival entrance where visitors arrive side by side.
- Is the venue permanent or temporary? A museum can accept a ceiling installation with cabling; a fan zone built for three days cannot.
- What are your privacy constraints? A camera films, even when the image is processed on the device. A floor sensor or a beam sees nobody.
How do the 5 counting technologies compare?
The table summarises the strengths and limits of each family. Values are general: real-world accuracy always depends on the model, the installation and the flow.
| Criterion | Counting mat (Mat 2.0) | 3D / stereo camera | Infrared beam | Manual clicker | Ticket scanning |
|---|---|---|---|---|---|
| Accuracy in crowds | Up to 98% in optimal conditions | Good, if mounting height is respected | Drops when people pass side by side | Depends on staff attention | Exact for scanned tickets |
| Both directions | Yes | Yes | Depends on model (dual beam) | Yes, with two clickers | Entries only, unless scanned out |
| Privacy (GDPR, nLPD) | No images, no personal data | Captures images, assessment needed | No images | No data | Often tied to a named ticket |
| Installation time | Set-up takes about 10 minutes | Mounting at height, tuning, often a technician | Quick | Immediate | Already in place if ticketed |
| Outdoors | Yes, with outdoor cover and platform | Possible, needs an overhead mount | Varies with light and mounting | Yes | Yes |
| Power and network | Gateway on mains, built-in 4G | Power and network, often wired | Often battery | None | Network for scanners |
| Typical use | 50 cm to 5 m passages, events, public venues | Retail, zone and path analytics | Narrow door, tight budget | Small event, spot checks | Access control for ticket holders |
When is another technology better than a mat?
To be clear: a mat is not the answer to everything.
- A 3D camera does better as soon as you want to analyse space: heatmaps, dwell time per zone, in-store paths. If your venue is permanent and you can mount a sensor on the ceiling, it is often the right choice.
- An infrared beam is the cheapest option for a narrow door where people pass one at a time, such as an office or a small shop.
- A manual clicker is enough for a one-off count with few passages and staff available.
- Ticket scanning remains essential to check access rights. It does not replace an occupancy counter, but it complements one.
A mat wins when several constraints add up: dense flow, exits needed, no camera, no network on site, temporary installation. That is why Paléo Festival counted its whole site in 2024: 262,215 festival-goers over 6 days (see the Paléo Festival case study).
Which detailed comparisons should you read next?
Each comparison goes through the criteria one by one, including where the other technology wins:
- Counting mat vs 3D camera: accuracy, privacy, installation and zone analytics.
- Counting mat vs infrared beam: passage width, side-by-side flow, direction.
- Counting mat vs manual clicker: reliability at peak times, staffing, history.
- Counting mat vs ticket scanning: entries versus real occupancy, exits and re-entries.
How can you test before deciding?
The safest approach is to measure your own passage. The Mat 2.0 people counting mat is sold as a pack from €580 excl. VAT (50 cm) to €2,830 excl. VAT (5 m), plus the Counting Service at €160 excl. VAT per year per gateway and the 4G subscription at €80 per year (mandatory, included with every gateway). For venues with a maximum capacity, see also venue occupancy control. And if you would rather see the figures before buying, request a pilot.
All pages
Counting mat or 3D camera: which should you choose?
Footfall camera (3D) or counting mat? Accuracy, privacy, installation and outdoor use: an objective comparison to help you choose the right people counting system.
→Counting mat or infrared beam: which should you choose?
Infrared beam or counting mat? Passage width, side-by-side crowds, direction and cost: how to choose the right people counter for your entrance.
→Counting mat or manual clicker: which should you choose?
Manual people counter or automatic counting mat? Reliability at peak times, staffing and live occupancy: how to choose the right method for your event.
→Counting mat or ticket scanning: which measures occupancy?
Ticket scanning counts entries, not real occupancy. A comparison of ticket scan attendance and a counting mat for controlling real event occupancy.
→Frequently asked questions
Which people counter is most accurate in a dense crowd?
Technologies that detect each person individually, such as an overhead 3D camera or a pressure-sensor mat, cope better with people walking side by side than an infrared beam or manual counting. Intechfloor's Mat 2.0 states up to 98% accuracy in optimal conditions, without a camera.
Which people counter should I use for a temporary event?
For a festival, trade show or fan zone you need a system that is quick to set up and take down, with no network or technician. A counting mat with a 4G gateway is up and running in minutes; a 3D camera needs mounting at height and often network cabling.
Is ticket scanning enough to know live occupancy?
Generally not. Ticket scanning counts ticket holders coming in, but not exits or re-entries that are not scanned. To know how many people are inside at a given moment, you also need to count exits, for example with a bidirectional counter at each access point.
Is there a GDPR-friendly people counter without a camera?
Yes. Infrared beams and pressure-sensor mats capture no images. Mat 2.0 only detects footsteps and collects no personal data, which simplifies the GDPR and Swiss nLPD assessment.
Related reading
How much does a people counter cost?
People counter cost explained: price by technology, hardware, installation, subscription and connectivity, with a worked Mat 2.0 example at public prices.
→Mat 2.0
Mat 2.0 counts entries and exits in real time, with no camera and no connection to your network. Passage widths from 50 cm to 5 m, built-in 4G.
→Venue occupancy monitoring: know how many people are inside, live
Venue occupancy monitoring for libraries, campuses and halls: Mat 2.0 counts entries and exits and alerts you before the limit. No cameras, no works.
→How to calculate the maximum occupancy of an event
Usable area, density per m², emergency exits: how to calculate the maximum capacity of an event, then monitor it live at every entrance and exit.
→Guides: people counting, capacity and crowd safety
Capacity, maximum occupancy, crowd safety, costs, GDPR and water leaks in stores: Intechfloor's practical guides for event organisers and venue operators.
→Try Mat 2.0 at your next event.
A guided pilot: installation, live data and a full report. Then you choose: buy or subscribe.