Use cases
Fan zone crowd counting and stadium access monitoring
To count the crowd in a fan zone or at stadium access points, you fit each entrance with Mat 2.0 mats: they count movement in both directions and enable live capacity control, with an alert before the set threshold. The system was used at the metro stations serving the stadiums in Qatar in 2021 and 2022.
Updated 1 October 2026
Why count the crowd at a fan zone or stadium?
A fan zone fills up in minutes before kick-off and empties all at once at the final whistle. Organisers need to know at every moment how many people are inside, to stay within the permitted capacity, close a gate in time and steer fans towards quieter entrances. Manual clicker counts cannot keep up with that pace; automatic counting at the gates can.
How do you deploy counting at access points?
- Map the entrances to the fan zone or the passages leading to the stadium (gates, corridors, transport access).
- Size each passage: 1 to 10 mats of 50 cm per gateway, covering 50 cm to 5 m. For a wider entrance, add another gateway.
- Lay the mats under an outdoor cover mat (20 cm overlap), with the outdoor platform, suitable for any ground (grass, gravel, paving, slabs, asphalt…).
- Install the gateway sheltered from the weather, on mains power, no more than 8 m from the mats. It transmits over 4G, independently of your network.
- Set alert thresholds in Technis Counting and share the live view with the security control room.
What results at major sporting events?
| Event | Setup |
|---|---|
| FIFA Arab Cup 2021 and 2022 World Cup, Qatar | Counting at the entrances of metro stations serving the stadiums |
| Paris 2024 Olympic flame | 65 mats outdoors for 2 months at the Olympic flame site (Tuileries) |
In Qatar, counting was placed at the metro stations, where fan flows are at their densest. The context is covered in the case study Doha metro counting for the World Cup. For Paris 2024, the mats ran for two months in the open air at the very busy Olympic flame site: see Paris 2024 Olympic flame: people counting.
Which specifications matter for sport?
| Specification | Mat 2.0 |
|---|---|
| Counting direction | Entries and exits |
| Load rating | 500 kg per mat |
| Thickness | 12 mm |
| Ingress protection | IP54 (mats) |
| Connectivity | Built-in 4G, Wi-Fi, Ethernet |
| Gateway power | Mains, 220-240 V (or 110-127 V) |
| Accuracy | Up to 98% in optimal conditions |
The mat films nobody and collects no personal data, which makes signage and public information simpler.
How do you set the fan zone capacity?
Capacity depends on usable floor area, exits and local regulations. Our guide to event capacity calculation explains the method. Once the capacity is approved, set an alert below the limit so there is time to close the gates.
How do you get equipped for a tournament?
For a club or stadium hosting events all year round, buying the Mat 2.0 people counting mat is the simplest route. For a one-off competition, rental is quoted on request. Before committing, request a pilot for a match or a screening night.
Frequently asked questions
How do you know how many fans are inside a fan zone?
By counting entries and exits at every gate. Mat 2.0 mats calculate occupancy continuously and the Technis Counting app sends an alert when capacity approaches the threshold you set.
Can a counting mat handle a tightly packed crowd?
Each mat bears a load of 500 kg and is 12 mm thick. Passages can be up to 5 m wide with 10 mats connected to a single gateway.
Does counting work outdoors for several weeks?
Yes, with the outdoor cover mat and the outdoor platform, suitable for any ground. At the Paris 2024 Olympic flame site, 65 mats ran outdoors for two months.
What happens if the mobile network saturates on match day?
The gateway buffers the counts and sends them as soon as the connection is restored. It can also use the site's Wi-Fi or Ethernet.
Related reading
2022 World Cup in Qatar: people counting at metro stations
FIFA Arab Cup 2021 and 2022 World Cup in Qatar: people counting at the entrances to the metro stations serving the stadiums.
→Paris 2024 Olympic flame: outdoor people counting
At the Paris 2024 Olympic flame site, 65 people-counting mats ran outdoors for 2 months, at the Tuileries.
→How to calculate the maximum occupancy of an event
Usable area, density per m², emergency exits: how to calculate the maximum capacity of an event, then monitor it live at every entrance and exit.
→Try Mat 2.0 at your next event.
A guided pilot: installation, live data and a full report. Then you choose: buy or subscribe.