Comparisons
Counting mat or manual clicker: which should you choose?
A manual clicker is enough for a small event with few passages and staff available. Once the flow is dense, there are several entrances or occupancy must be tracked live, a counting mat such as Mat 2.0 counts entries and exits automatically and frees up your staff.
Updated 1 October 2026
How do the two methods work?
A manual clicker is a hand-held tally counter used by a steward. They click for each entry, and on a second counter for each exit if occupancy is needed. Some phone apps centralise the clicks, but the principle is still human.
The Mat 2.0 mat lies on the floor at the entrance, under a cover mat. Its pressure sensors detect each footstep and its direction. A 4G gateway sends entries, exits and current occupancy to the Technis Counting app in real time, with no one involved.
Where does manual counting reach its limits?
Manual counting works as long as the steward can keep up. It becomes fragile in four situations:
- Peaks: when the gates open or a concert ends, it is hard to follow every person, let alone in both directions.
- Several entrances: counts must be added up by radio, with delays and transmission errors.
- Duration: over a multi-day event, attention drops and shifts must be rotated.
- History: a clicker keeps no hourly curve, which is useful for the debrief and next year’s edition.
The mat counts continuously, with stated accuracy of up to 98% in optimal conditions, and keeps the history in the app.
Side-by-side comparison
| Criterion | Mat 2.0 counting mat | Manual clicker |
|---|---|---|
| Principle | Pressure sensors on the floor | Steward clicks |
| Accuracy at peak times | Up to 98% in optimal conditions | Depends on the steward, drops with flow |
| Both directions | Yes, automatically | Yes, with a second clicker |
| Several entrances | Automatic total in the app | Added up by radio |
| Live occupancy and alerts | Yes | No, or via readings |
| History | Yes | No, unless written down |
| Staffing | None needed to count | One steward per entrance, with shifts |
| Installation | Set-up takes about 10 minutes | Immediate |
| Hardware cost | Pack from €580 excl. VAT, plus annual service | A few euros |
When is a manual clicker the better choice?
For a small event with a single entrance and a calm flow, such as a public meeting, a guided tour or a spot check, a manual clicker is unbeatable: it costs next to nothing and is ready immediately. It is also useful as a cross-check during an automatic counting pilot.
When is a mat the better choice?
A mat is the obvious choice once occupancy is a safety issue, flows are heavy or the event runs for days. In 2023, Paléo Festival used Mat 2.0 to monitor the capacity of the front-of-stage pit during the Indochine concert, capped at 800 people. In 2024, the festival counted the whole site: 262,215 festival-goers over 6 days, with an average time on site of 5 h 23 min (see the Paléo Festival case study). This kind of monitoring is described in festival people counting.
How much does each option cost?
A clicker costs a few euros, but the real cost is staff time over the whole event. The Mat 2.0 pack costs from €580 excl. VAT (50 cm) to €2,830 excl. VAT (5 m), plus the Counting Service at €160 excl. VAT per year per gateway and the 4G subscription at €80 per year (mandatory, included with every gateway); event rental is quoted on request. To compare at your next event, request a pilot.
Frequently asked questions
Is a manual tally counter reliable for occupancy control?
At low throughput, yes, provided the steward also counts exits and does nothing else. At peak times, missed clicks add up and, with several entrances, counts have to be added up by hand. The occupancy figure quickly becomes approximate.
How do you add up counts from several entrances in real time?
With manual clickers, you need readings by radio or phone. With connected counters such as Mat 2.0, each gateway sends its counts to the Technis Counting app, which shows total occupancy and triggers occupancy alerts.
Does a counting mat replace front-of-house staff?
No. It replaces the task of counting, not welcoming, directing or keeping people safe. Stewards who were clicking can focus on the public, and the safety manager sees live occupancy on their phone.
Related reading
People counting for festivals: control entrance flows and capacity live
Count entries, exits and people on site at your festival in real time, with no cameras. Mat 2.0 counted 262,215 festival-goers at Paléo Festival 2024.
→Paléo Festival: counting festival-goers across the entire site
At Paléo Festival 2024 in Nyon, floor-based counting covered the entire site: 262,215 festival-goers over 6 days, 5 h 23 min average stay.
→How to calculate the maximum occupancy of an event
Usable area, density per m², emergency exits: how to calculate the maximum capacity of an event, then monitor it live at every entrance and exit.
→Try Mat 2.0 at your next event.
A guided pilot: installation, live data and a full report. Then you choose: buy or subscribe.