Comparisons
Counting mat or ticket scanning: which measures occupancy?
Ticket scanning tells you how many tickets were validated, not how many people are on site right now. To track real occupancy you also need to count exits and re-entries: a counting mat such as Mat 2.0 does this at each entrance, alongside your ticketing.
Updated 1 October 2026
What does ticket scanning actually measure?
Scanning is first and foremost about checking access rights: valid ticket, not already used, right zone. Along the way, it produces an exact count of validated tickets. That is valuable data for ticketing and for the commercial debrief.
But it is not occupancy. Scanning does not see:
- exits, whether temporary or final;
- re-entries if the ticket is not rescanned, or double counts if it is;
- people without tickets: staff, exhibitors, artists, contractors, guests coming in through another gate;
- internal zones: front-of-stage pit, hall, VIP area, where there is no check.
Why do you need to count exits?
Because safety depends on the number of people inside at a given moment, not on total entries. A venue’s or zone’s permitted capacity is checked in real time, and only the difference between entries and exits gives you that figure. See our guide to event capacity calculation.
Mat 2.0 counts in both directions, with stated accuracy of up to 98% in optimal conditions. The Technis Counting app shows live occupancy and sends an alert when a threshold is reached.
Side-by-side comparison
| Criterion | Mat 2.0 counting mat | Ticket scanning |
|---|---|---|
| Purpose | Measure attendance and occupancy | Control access rights |
| Entries | Yes | Yes, scanned tickets |
| Exits | Yes | No, unless scanned out |
| People without tickets | Counted | Not counted |
| Internal zones (pit, hall) | Yes, one mat per zone entrance | No, unless separately checked |
| Live occupancy | Yes, with alerts | Approximate |
| Average time on site | Can be estimated | No, unless scanned out |
| Personal data | None | Often tied to a named ticket |
| Installation | Set-up takes about 10 minutes per passage | Already in place if ticketed |
When is ticket scanning enough?
For a seated, allocated-seating event where the audience enters once and stays until the end, such as an indoor concert or a plenary session, the number of scanned tickets is a good approximation of occupancy. Adding a counter is not always worthwhile.
When should you add a counting mat?
A mat becomes useful as soon as the audience moves around: a festival with comings and goings, a trade show with exits and re-entries, a conference with several rooms, a free fan zone with no tickets. It also lets you monitor an internal zone with limited capacity.
In 2023, Paléo Festival monitored the capacity of the front-of-stage pit during the Indochine concert, capped at 800 people, a zone with no ticket check of its own. In 2024, the festival counted the whole site: 262,215 festival-goers over 6 days, and an average time on site of 5 h 23 min, a figure no entry scan can provide (see the Paléo Festival case study). For exhibitions, see trade show footfall.
How much does the add-on cost?
The Mat 2.0 pack costs from €580 excl. VAT (50 cm) to €2,830 excl. VAT (5 m) per passage, plus the Counting Service at €160 excl. VAT per year per gateway and the 4G subscription at €80 per year (mandatory, included with every gateway). For a one-off event, rental is quoted on request. To measure the gap between scanned tickets and real attendance at your event, request a pilot.
Frequently asked questions
Why does the number of scanned tickets differ from the number of people inside?
Because scanning counts entries, not exits. Visitors who step out for a smoke, go back to the car park or leave early are still counted as present. Guests, exhibitors, staff and children without tickets are sometimes not scanned at all.
Can ticketing data tell you how long visitors stay?
Only if every visitor is also scanned on the way out, which is rare and slows the flow. Bidirectional counting at the entrances lets you estimate average time on site without identifying anyone: Paléo Festival measured an average stay of 5 h 23 min in 2024.
Can a counting mat replace ticket checks?
No. A mat counts passages; it does not check who is allowed in. The two tools complement each other: ticketing controls access, the mat measures real attendance and live occupancy.
Related reading
Measuring trade show footfall, hall by hall
Measure trade show footfall hall by hall, in real time and without cameras, using Mat 2.0 people counting mats. Pilots available on request.
→Conference attendance tracking, session by session
Track real conference attendance room by room, in real time and without cameras, with Mat 2.0. Live capacity, per-session history, pilots on request.
→Paléo Festival: counting festival-goers across the entire site
At Paléo Festival 2024 in Nyon, floor-based counting covered the entire site: 262,215 festival-goers over 6 days, 5 h 23 min average stay.
→Try Mat 2.0 at your next event.
A guided pilot: installation, live data and a full report. Then you choose: buy or subscribe.