INTECHFLOOR

Guides

Venue capacity rules in Switzerland: who sets the limit and how do you stick to it?

In Switzerland, the maximum capacity of a bar, hall or nightclub is set by the cantonal or municipal fire authority, based on the AEAI fire protection prescriptions. The operator must then respect it at all times, which means knowing how many people are inside.

Updated 4 November 2026

Who sets a venue’s capacity in Switzerland?

The maximum capacity of a bar, restaurant, theatre or nightclub is not chosen by the operator. It comes from two things:

  • the AEAI fire protection prescriptions (AEAI is the association of cantonal fire insurance bodies, VKF in German), which apply across Switzerland and set requirements such as escape route widths;
  • the fire authority, cantonal or municipal depending on the canton, which applies those rules to the actual building at planning stage, on a change of use or during an inspection.

The operating licence for the venue sits on top of this. In practice, the binding figure is the one in the documents issued by the authority, not the operator’s own calculation.

How is capacity calculated?

The calculation combines the area open to the public, an occupancy density for the type of use and the capacity of the exits. As an example, the ECA Vaud document Temporary events: fire protection requirements uses these values:

UsePeople per m² (ECA calculation value)
Restaurant1
Place of assembly, general2
Theatre, cinema1.5
Nightclub, standing concert4
Fair or exhibition with stands0.6

The same document links the number and width of exits to headcount: above 200 people, at least two exits of 1.20 m, according to ECA Vaud. Capacity is the lower of the two results (area or exits). Our guide to event capacity calculation walks through the method.

What changed in 2026?

The fire in a Crans-Montana bar on 1 January 2026 led the cantons to review fire prevention in bars and venues. Some of the official measures:

  1. Nationally, the AIET, the intercantonal body that makes the AEAI prescriptions binding, banned pyrotechnic articles in places open to the public from 1 April 2026 (press release, 6 March 2026, in French).
  2. Vaud announced extra inspections of the highest-risk venues, coordinated by the cantonal police and ECA, plus unannounced checks by municipalities (Council of State, 8 January 2026).
  3. Geneva found that the maximum number of people was not systematically stated for licensed venues holding fewer than 300 people; the building permits office, which includes the fire police, will gradually define capacity for all of them (Council of State, 1 July 2026).
  4. Valais brought a revised ordinance into force on 1 September 2026, with yearly inspections for late-night bars (State of Valais).

For operators, the takeaway is simple: capacity limits are becoming more formal, and checks during opening hours more frequent. If your venue has no written capacity yet, ask the fire authority for it rather than working one out yourself, and keep a copy of the document at the venue.

How do you stay within capacity while open?

Knowing your limit is not enough: you need to know, at 1 a.m., how many people are inside. The usual methods all have limits:

MethodUpsideDownside
Eyeballing itFreeNo figure, nothing to show an inspector
Hand clicker at the doorSimpleExits get missed, ties up a staff member
Tickets or wristbandsAccess controlCounts entries, rarely exits
Automatic bidirectional countingLive occupancy, historyHardware at each door

Automatic bidirectional counting records entries and exits at every door and tracks the difference continuously. It is the only way to get a reliable occupancy figure when there are several doors or people going in and out (smokers, cloakroom, terrace).

How do you display and prove capacity in real time?

The Mat 2.0 people counting mat lies on the floor at each entrance, under a protective mat. It counts in both directions, with no camera and no personal data, with accuracy of up to 98% in optimal conditions. The gateway plugs into a mains socket and connects over 4G, so no building work is needed.

In practice:

  • the Technis Counting app (iOS, Android, web) shows occupancy in real time, on a manager’s phone or a screen at the door;
  • a threshold alert, set below capacity, gives you time to hold the queue;
  • the history lets you show afterwards that capacity was never exceeded.

Know the limits too, before you rely on it: the gateway must stay sheltered from the weather and on mains power, the mats are IP54 and work from 0 to 50 °C, and the protective mat is mandatory. The full set-up for a permanent venue is in venue occupancy control.

To try it in your venue, request a pilot.

Frequently asked questions

Who sets the maximum capacity of a bar or venue in Switzerland?

The competent fire authority, cantonal or municipal depending on the canton, applying the AEAI fire protection prescriptions. Capacity depends mainly on how the space is used and on the escape routes. The operator does not set it, but must respect it.

How many people per square metre are allowed in a Swiss nightclub?

The ECA Vaud document on temporary events uses 4 people per m² for a nightclub or a standing concert, 2 for a general place of assembly and 1 for a restaurant. These are calculation values: the binding figure is the one in your permit.

What has changed since the Crans-Montana fire?

Several cantons have stepped up inspections of bars and venues, and the intercantonal authority (AIET) banned pyrotechnic articles in premises open to the public from 1 April 2026. Geneva announced that capacity would gradually be defined for every licensed bar and restaurant.

How can you prove capacity was respected?

By counting entries and exits at every door and keeping the history. A bidirectional counter such as Mat 2.0 shows occupancy in real time, sends an alert before the set threshold and keeps the data for later review.

Try Mat 2.0 at your next event.

A guided pilot: installation, live data and a full report. Then you choose: buy or subscribe.

Request a pilot Shop