INTECHFLOOR

Comparisons

Counting mat or infrared beam: which should you choose?

An infrared beam is the cheapest option for a narrow door where people pass one at a time. As soon as the passage gets wider or visitors arrive side by side, a counting mat such as Mat 2.0 counts every footstep in both directions, from 50 cm to 5 m wide.

Updated 1 October 2026

How do the two technologies work?

An infrared beam sends a beam across the passage to a receiver or reflector. Each time the beam is broken, one passage is counted. With two offset beams, the sensor works out the direction from the order in which they are broken. Many models run on batteries.

The Mat 2.0 mat lies on the floor under a cover mat. Its pressure sensors detect each footstep and its direction. A 4G gateway sends entries, exits and current occupancy to the Technis Counting app in real time.

What happens when people walk side by side?

This is the main limitation of infrared. A horizontal beam cannot see how many people break it at once: two visitors side by side, a parent with a child or a tight group may count as one. The wider the passage, the more often it happens.

The mat measures pressure across the whole surface of the passage. It distinguishes the footsteps of people walking side by side and states accuracy of up to 98% in optimal conditions. It does depend on installation: the passage must be fully covered and the cover mat must overlap by at least 15 cm.

Side-by-side comparison

CriterionMat 2.0 counting matInfrared beam
PrinciplePressure sensors on the floorInterruption of a horizontal beam
Side-by-side flowDistinguishes people walking abreastMay count a group as one person
Both directionsYesDepends on model (dual beam)
Recommended width50 cm to 5 m per gatewayNarrow door, single-file passage
PrivacyNo images, no personal dataNo images
PowerGateway on mainsOften battery
DataReal time over 4G, app, occupancy alertsDepends on model, sometimes read locally
OutdoorsYes, with outdoor cover and platformVaries with light and mounting
Entry costPack from €580 excl. VAT, plus annual serviceGenerally lower

When is an infrared beam the better choice?

To be fair: for a narrow door to an office, shop or meeting room, where people pass one at a time, an infrared beam is simple, discreet and inexpensive. A battery model needs no socket and no network. If all you want is a rough idea of daily footfall, it is often enough.

When is a mat the better choice?

A mat wins when:

  • the passage is wide (beyond a single door) or open, with no posts to mount a beam on;
  • visitors arrive in groups or side by side, as at a stadium, fan zone or festival entrance;
  • you need to know how many people are inside in real time, with occupancy alerts;
  • the site is temporary or outdoors.

At the Paris 2024 Olympic flame site, 65 mats were used outdoors for 2 months at the Tuileries (see the Paris 2024 Olympic flame case study). A similar scenario is described in fan zone crowd counting.

How much does each option cost?

An entry-level infrared beam generally costs less than a mat; check, however, whether the model counts both directions and sends data in real time, otherwise you will need to add to it. The Mat 2.0 pack costs from €580 excl. VAT (1 mat, 50 cm) to €2,830 excl. VAT (10 mats, 5 m), plus the Counting Service at €160 excl. VAT per year per gateway and the 4G subscription at €80 per year (mandatory, included with every gateway). To see the difference at your own entrance, request a pilot.

Frequently asked questions

Why does an infrared people counter miscount in crowds?

An infrared beam counts interruptions of a beam. If two people walk side by side or very close together, they break the beam at the same time and may be counted as one. The error grows with the density of the flow and the width of the passage.

Can an infrared counter tell entries from exits?

Only dual-beam models, which work out direction from the order in which the two beams are broken. A single beam counts passages with no direction, so it cannot tell you how many people are inside.

How wide a passage can a counting mat cover?

One Mat 2.0 mat covers 50 cm of passage. A gateway takes 1 to 10 mats, so a passage from 50 cm to 5 m. For a wider entrance, you add a second gateway.

Try Mat 2.0 at your next event.

A guided pilot: installation, live data and a full report. Then you choose: buy or subscribe.

Request a pilot Shop