Comparisons
Counting mat or 3D camera: which should you choose?
A 3D camera is the best choice for analysing zones in a permanent venue (heatmaps, paths, dwell time). A counting mat such as Mat 2.0 is better for counting entries and exits through a passage with no images, no ceiling mount and in a few minutes, especially for events or outdoors.
Updated 1 October 2026
How do the two technologies work?
A 3D (or stereo) camera is mounted on the ceiling above the passage. Two lenses measure depth, which lets it detect heads and shoulders and track each person in the field of view. The image is usually processed on the device, which only transmits counts.
The Mat 2.0 counting mat lies on the floor under a cover mat. Its pressure sensors detect each footstep and work out the direction of travel. A 4G gateway sends entries, exits and current occupancy to the Technis Counting app in real time.
Which is more accurate?
Both technologies are designed for dense flows, unlike an infrared beam. A well-installed 3D camera gives good results, provided the mounting height is respected and the counting zone is set correctly. Mat 2.0 states accuracy of up to 98% in optimal conditions, with no calibration.
In both cases, real-world accuracy depends on installation. For the camera: height, lighting, reflections. For the mat: a compliant cover mat (at least 15 cm overlap, no thicker than 15 mm) and a passage fully covered.
What is the difference for privacy?
This is the clearest gap. A camera captures images of identifiable people, however briefly. The GDPR in Europe and the nLPD in Switzerland then apply: public notice, legal basis, security. Many manufacturers process the image inside the sensor, which reduces the risk without removing it.
A mat sees nobody. Mat 2.0 collects no images and no personal data: only footsteps converted into counts, hosted on AWS in Frankfurt. For a museum, a library or a place of worship, that is often the deciding factor. More in our guide to people counting and GDPR.
Side-by-side comparison
| Criterion | Mat 2.0 counting mat | 3D camera |
|---|---|---|
| Principle | Pressure sensors on the floor | Stereo vision from the ceiling |
| Accuracy | Up to 98% in optimal conditions | Good if correctly installed |
| Both directions | Yes | Yes |
| Images or personal data | None | Image captured, processed on device or not |
| Installation | Laid on the floor, set-up takes about 10 minutes | Mounting at height, tuning, often a technician |
| Network | Built-in 4G, Wi-Fi or Ethernet optional | Usually wired network |
| Width covered | 50 cm to 5 m per gateway | Depends on height and number of cameras |
| Outdoors | Yes, with outdoor cover and platform | Possible with an overhead mount |
| Zone analytics, heatmaps | No | Yes |
| Removal and reuse | Immediate | Dismantling a fixed installation |
When is a 3D camera the better choice?
Choose a camera if you want to understand what happens inside, not just at the doors: heatmaps, time spent in front of a shelf, queues, visitor paths. It also suits sites where nothing may be placed on the floor, and ceilings already wired for a network. For a permanent shop looking to optimise its layout, it is the most complete tool.
When is a mat the better choice?
Choose a mat if you need to count the people inside without filming them, on a temporary site, with no structure or no network. That covers festivals, trade shows, fan zones and temporary exhibitions. At the Islamic Arts Biennale in Jeddah, around fifty mats measured attendance across 5 galleries and 2 pavilions: 1.5 million visitors over 4 months (see the Jeddah Biennale case study). For museums, see also our museum visitor counter page.
How much does each option cost?
The price of a 3D camera varies widely with the model and the installation; ask for a quote that includes mounting and cabling. Mat prices are public: a Mat 2.0 pack costs from €580 excl. VAT (50 cm) to €2,830 excl. VAT (5 m), plus the Counting Service at €160 excl. VAT per year per gateway and the 4G subscription at €80 per year (mandatory, included with every gateway). To compare on your own passage, request a pilot.
Frequently asked questions
Is a camera-based people counter GDPR compliant?
It can be, but a camera captures images of identifiable people, even if it does not store them. The operator therefore has to carry out a GDPR or Swiss nLPD assessment: legal basis, public notice, retention period. A pressure-sensor mat such as Mat 2.0 captures no images and no personal data.
Can a 3D camera count people outdoors?
Yes, provided there is an overhead mount above the passage, a power supply and usually a network. On a site with no structure, such as a festival entrance on grass, a floor mat with an outdoor platform is simpler to deploy.
What ceiling height does a people counting camera need?
It depends on the model and on the width to cover: the wider the passage, the higher the camera must be or the more cameras you need. Follow the manufacturer's guidance. A mat has no such constraint: one mat covers 50 cm of passage, up to 10 mats for 5 m.
Related reading
People counting and GDPR: what are your obligations?
Cameras, Wi-Fi, floor sensors: which people counting methods process personal data under the GDPR and Switzerland's nLPD, and which do not?
→A museum visitor counter that needs no camera
A museum visitor counter for galleries and exhibitions: the discreet, modular Mat 2.0 mat, no cameras, no personal data, real-time visitor numbers for every equipped space.
→Islamic Arts Biennale Jeddah: gallery visitor counting
Islamic Arts Biennale Jeddah 2025: around 50 people-counting mats across 5 galleries and 2 pavilions, 1.5 million visitors over 4 months.
→Counting mat or infrared beam: which should you choose?
Infrared beam or counting mat? Passage width, side-by-side crowds, direction and cost: how to choose the right people counter for your entrance.
→Try Mat 2.0 at your next event.
A guided pilot: installation, live data and a full report. Then you choose: buy or subscribe.