INTECHFLOOR

Guides

People counting and GDPR: what are your obligations?

People counting falls under the GDPR or the Swiss nLPD as soon as it processes data that can identify someone: an image, a phone identifier, a named ticket. A pressure-sensor mat such as Mat 2.0 captures no images and no personal data: it only produces anonymous counts of entries and exits.

Updated 1 October 2026

What counts as personal data in people counting?

The GDPR in Europe and Switzerland’s revised Federal Act on Data Protection (nLPD, or nFADP), in force since 1 September 2023, apply whenever processing involves information relating to an identified or identifiable person. In people counting, that can be:

  • an image in which a face or figure can be recognised;
  • a phone’s technical identifier picked up over Wi-Fi or Bluetooth;
  • a named ticket or a badge linked to a name;
  • a movement trace precise enough to single out an individual.

By contrast, an aggregate number (“1,250 people inside at 3 pm”) is not personal data, provided it cannot be traced back to anyone. So the real question is what the sensor captures, not just what it displays.

How do counting technologies compare?

TechnologyWhat the sensor capturesPossible personal dataSteps to plan
2D or 3D cameraImages of peopleYes, even if processed on the deviceLegal basis, notice, security, possibly an impact assessment
Wi-Fi, BluetoothPhone identifiersYes, generallyCase-by-case assessment
Ticket or badge scanningTicket, sometimes namedYes if namedCovered by ticketing processing
Infrared beamBeam interruptionsNoLimited
Pressure-sensor matFootsteps on the floorNoLimited
Manual clickerClicksNoNone

This table is not legal advice: every installation should be assessed by your data protection officer.

Are counting cameras prohibited?

No. Counting cameras are used lawfully in many shops and public venues. Many models process the image on the device and only transmit numbers, which greatly reduces the risk. They also provide analytics a floor sensor cannot, such as zone heatmaps.

But they capture images, and the operator must justify this, inform the public and secure the system. In a museum, library, place of worship or healthcare setting, that process can be burdensome or poorly received. See the comparison counting mat vs 3D camera.

Why does a counting mat collect no personal data?

The Mat 2.0 people counting mat works with pressure sensors: it detects footsteps and their direction, nothing else. It has no camera, no microphone and no phone detection. It cannot tell one person from another and produces only three numbers: entries, exits, occupancy.

These counts are sent by the 4G gateway and hosted on AWS in the eu-central-1 region, in Frankfurt. The Technis Counting app displays them in real time, with history and occupancy alerts. Stated accuracy is up to 98% in optimal conditions.

That is why mats are often chosen by cultural and academic venues. EPFL, for example, monitors occupancy of its library, and the Islamic Arts Biennale in Jeddah measured 1.5 million visitors over 4 months with around fifty mats (see the Jeddah Biennale case study). For museums, see our museum visitor counter page.

What should you ask a people counting supplier?

  1. Does the sensor capture images, sound or phone identifiers?
  2. Does raw data leave the device? In what form?
  3. Where is the data hosted, and in which country?
  4. Who has access, and how long is it kept?
  5. Can the supplier provide documentation for your record of processing activities?

For data protection questions about Mat 2.0, write to dataprotection@intechfloor.com or read our privacy policy. To check how it works on your site, request a pilot.

Frequently asked questions

Is a camera-based people counter subject to the GDPR?

In principle yes, because it captures images of identifiable people, even if the image is processed on the device and not stored. The operator must then identify a legal basis, inform the public and secure the processing. The exact assessment depends on the system and is a matter for your data protection officer.

Is Wi-Fi or Bluetooth people counting anonymous?

Not inherently. These systems detect signals sent by phones, which contain technical identifiers. Those identifiers may be considered personal data, even if they are later hashed or aggregated, so a GDPR or nLPD assessment is required.

Where is Mat 2.0 counting data hosted?

Mat 2.0 counts are hosted on AWS in the eu-central-1 region, in Frankfurt, Germany. They are numbers of entries, exits and occupancy: no images and no personal data are collected.

Do you need a notice sign for a counting mat?

Notice signs are mainly aimed at systems that process personal data, such as video. A mat that only counts footsteps does not. Many operators still choose to inform the public for transparency; confirm the approach with your data protection officer.

Try Mat 2.0 at your next event.

A guided pilot: installation, live data and a full report. Then you choose: buy or subscribe.

Request a pilot Shop